Tungsten Carbide End Milling Cutter 4 Flutes HRC60 Flat Carbide End
Milling Cutter
End Milling Cutter
Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds. Made of solid carbide, they are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for
the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a square end for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
Titanium-nitride (TiN) coated end mills have good wear resistance. Titanium-aluminum-nitride (TiAlN) coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat
to the chips, keeping the tool cool, even when used without lubrication
| Flutes: | 2-4 Flute |
| Smooth Finish: | Highly Polished |
| Helix Angle: | |
| CoatingCoating: | no. |
| HRC45, 55, 65: | Flat end mill, ball nose end mill, corner radius end mill and
aluminium processing end mill |
| Size: | Dia: 1-20 mm, Overal Length:30-200mm |
| Feature: | Excellent chip evacuation |
| ITEM | FLUTE DIAMETER(d) | FLUTE LENGTH(l) | SHANK DIAMETER(D) | OVERALL LENGTH(L) |
| 1*3*4*50 | 1mm | 3mm | 4mm | 50mm |
| 2*5*4*50 | 2mm | 5mm | 4mm | 50mm |
| 3*8*4*50 | 3mm | 8mm | 4mm | 50mm |
| 4*10*4*50 | 4mm | 10mm | 4mm | 50mm |
| 5*13*6*50 | 5mm | 13mm | 6mm | 50mm |
| 6*15*6*50 | 6mm | 15mm | 6mm | 50mm |
| 8*20*8*60 | 8mm | 20mm | 8mm | 60mm |
| 10*25*10*75 | 10mm | 25mm | 10mm | 75mm |
| 12*30*12*75 | 12mm | 30mm | 12mm | 75mm |
| 14*40*14*100 | 14mm | 40mm | 14mm | 100mm |
| 16*40*16*100 | 16mm | 40mm | 16mm | 100mm |
| 18*45*18*100 | 18mm | 45mm | 18mm | 100mm |
| 20*45*20*100 | 20mm | 45mm | 20mm | 100mm |
| Carbide Material Introduction |
ENDMILL
GRADE | Material Grade | Grain | Introduction | Application |
| HRC45 carbide material | YL10.2 | 0.6μm | YL10.2 is tungsten carbide powder with 89.7% WC and 10% cobalt
powder, and has high toughness and wear resistance. | Suitable for General Steel |
| HRC55 carbide material | K30 | 0.5μm | K30 is ultra fine grain and containes Ni and Cr element, which
provides high strength and good toughness. | General Steel,
cast Steel,
cast iron |
| HRC60 carbide material | WF25 | 0.4μm | WF25 is 0.4micron ultrafine carbide powder and provides very high
toughness and wear resistance. | High Hard Material, steel, cast iron, etc |
| HRC65 carbide material | GU25UF | 0.4μm | GU25UF is 0.4micron powder with 12% cobalt and has very high
toughness and wear resistance.It is the most suitable for hard
cutting. | Titanium Alloy, High-temperature Alloy, Harden material, etc |
| Stainless Steel material | WF25 | 0.4μm | WF25 is 0.4micron ultrafine carbide powder and provides very high
toughness and wear resistance. | stainless steel |
| Coating Introduction |
|
| ENDMILL GRADE | Coating Name | Color | Hv | μm | Friction | The Max ºC |
| HRC45 coating | AlTiN | black | 3300 | 1-4 | 0.7 | 850ºC |
| HRC55 coating | TiSiAlN | bronzed | 3400 | 1-4 | 0.7 | 900ºC |
| HRC60 coating | AlCrSiN | black | 4000 | 1-7 | 0.35 | 1100ºC |
| HRC65 coating | nACo 3 Blue | blue | 4500 | 1-7 | 0.45 | 1200ºC |
| Stainless Steel coating | nACo 3 Blue | blue | 4500 | 1-7 | 0.45 | 1200ºC |
FAQ
1.Q: Are you a manufacturer?
A: We are the manufacturer and the factory is in Zigong City,
China.
2.Q: Can you customize products for me?
A: Yes, we support OEM&ODM.
3.If you need customized products, please tell me the following
information.
-. carbide grade
-. carbide type and application
-. detailed dimensions(it is better to have a technical carbide
drawing)
-. product's surface treatment
-. other requirements
